top spacer
topbar
nav spacer
nav spacer   nav spacer

Craftsmanship
Summit Series
American West
Mission Series
doors Series
The Specials Shop





Joint Types
Joint Types
Profiles
Search

FACE FRAMES
Select solid 3/4-inch oak, quarter sawn red oak, maple, cherry, hickory or alder are machine and hand-sanded. Face frame rails and stiles are glued and pinned with mortise and rounding tenon joints. Stiles have a 3/8-inch trimmable scribe. Stiles are dadoed to receive cabinet side. Rails are rabbeted to receive cabinet tops & bottoms.

Cabinets 27-36-inches wide have butt doors with no center rail. Cabinets 36-inches wide or wider have a 3-inch center rail.

TOPS AND BOTTOMS
1/2-inch industrial particle board overlayed with rolled white melamine or upgrade option thermofused maple-grain melamine. Tops and bottoms are hot glued into dadoed backs, sides and rabbeted face frames parts.

BACKS
3/8-inch industrial particle board overlayed with rolled white melamine or upgrade option thermofused maple-grain melamine. Backs are hot glued to dadoed sides, top and bottom.

END PANELS
Unfinished ends are 1/2-inch industrial particle board overlayed on one side with rolled white melamine or upgrade option thermofused melamine maple grain. Finished ends are 1/2-inch industrial particle board overlayed on one side with rolled white melamine or upgrade option thermofused maple-grain melamine and one side with oak, maple, cherry, hickory or alder veneer. Quarter sawn red oak requires premium ends. Upgrade option thermofused melamine maple grain requires premium ends. End panels are dadoed to receive sides, tops and bottoms.

SHELVES
Adjustable shelves are 3/4-inch industrial particle board overlayed with rolled white melamine or upgrade option thermofused melamine maple grain. Shelf fronts are banded with PVC edging. Adjustable shelf holes are 8mm drilled at 32mm spacing. Base shelves are 2/3 cabinet depth and are 3/4-inch industrial particle board overlayed with rolled white melamine or upgrade option thermofused maple-grain melamine.

DRAWERS
Drawer fronts are shaped select solid 3/4-inch oak, quarter sawn red oak, maple, cherry, hickory, alder, or 5-piece front. The 4-piece drawer box is 5/8-inch soft maple with 1/4-inch maple veneer bottoms. Drawers have a 4-piece drawer box with dovetailed joints. Bottoms are glued into dadoed sides and backs. Fronts are attached to drawer boxes with mounting screws.

DRAWER SLIDES
Drawer slides are Mepla Dynamic NT full access or upgrade option Mepla Dynamic NT full extension soft close. Slide features include sufficient slide travel for full view of drawer contents, fully concealed, self-closing, ball bearing construction, limited side sway, automatic side adjustment, and ultra smooth operation. Load capacity is 100 lbs static and 75 lbs dynamic.

DOOR HINGES
Hinges are either Amerock Double Demountable 8704, Mepla ACC181 Face Frame or Mepla Click-On CS29 Box hinge.

FINISHES
Cabinet exteriors have a high quality hand-wiped stain. A conversion sealer is applied and hand-sanded, one coat of catalyzed conversion varnish is then applied. Premium White has one coat of white varnish primer with one coat of white conversion varnish. American West is a multi-step finish process.

FULL-INSET DOORS
When Schroll builds cabinets with full inset doors and drawers, extra care is taken by our senior craftsman to produce face frames, cabinet boxes, drawers and doors with precise tolerance and squareness. All doors and drawer fronts are individually hand fitted into frame openings prior to finishing. The assembly of the doors to the cabinet box is performed on a flat and level surface, which produces a properly adjusted end product.



FACE FRAMES
Select solid 3/4-inch oak, maple, hickory or alder are machine- and hand-sanded. Rails and stiles are glued and pinned with mortise and rounding-tenon joints. Stiles have a 3/8-inch trimmable scribe. Stiles are dadoed to receive cabinet sides. Rails are rabbeted to receive cabinet tops and bottoms.

Cabinets 27-36-inches wide have butt doors with no center rail. Cabinets 39-inches wide and wider have a 3-inch center rail.

TOPS AND BOTTOMS
1/2-inch industrial particle board overlayed with decorative woodgrain foil impregnated with a melamine resin. Tops and bottoms are hot glued into dadoed backs, sides and rabbeted face frame parts.

BACKS
3/8-inch industrial particle board overlayed with decorative woodgrain foil impregnated with a melamine resin. Backs are hot glued to dadoed sides, top and bottom.

END PANELS
Unfinished ends are 1/2-inch industrial particle board overlayed one side with decorative woodgrain foil impregnated with a melamine resin. Finished ends are 1/2-inch industrial particle board overlayed one side with decorative woodgrain foil impregnated with a melamine resin and one side with oak, maple, hickory or alder veneer. End panels are dadoed to receive face frames, tops and bottoms.

DOOR STYLES
Consult with your designer for individual style specifications.

SHELVES
Adjustable shelves are 3/4-inch industrial particle board overlayed with decorative woodgrain foil impregnated with a melamine resin. Shelf fronts are banded with .018mil PVC edging. Adjustable shelf holes are 8mm drilled at 32mm spacing. Base shelves are 1/2 cabinet depth and are 3/4-inch industrial particle board overlayed with decorative woodgrain foil impregnated with a melamine resin.

DRAWERS
Drawer fronts are shaped select solid 3/4-inch oak, maple, hickory or alder. The 4-piece drawer box is 5/8-inch MDF board overlayed with decorative woodgrain foil impregnated with a melamine resin. Drawer box is assembled with wood dowels. Bottoms are 1/4-inch MDF board overlayed with decorative woodgrain foil impregnated with a melamine resin glued into dadoed sides and backs. Fronts are attached to drawer boxes with mounting screws.

DRAWER SLIDES
Drawer slides are Houck series 950SP. Slide features include bottom mounted, epoxy coated with precision bearings. Load capacity is 75 lbs.

DOOR HINGES
Hinges are either Amerock Double Demountable 8704 or Mepla ACC181 Face Frame hinge.

FINISH
Cabinet exteriors have a high quality hand-wiped stain. A conversion sealer is applied and hand-sanded, one coat of catalyzed conversion varnish is then applied.